Products Passive local last mile EPS 8/9 Telco circuits | Active Telco circuits such as E1, E3 and DS3 | Digital Subscriber Line Access Multiplexers (DSLAM's) | Download Data Sheets

Network Extenders for Active Telco circuits such as E1 (2Mbps), E3 (34Mbps) and DS3 (45Mbps) circuits

Top 4 Features

These Network Extender products use our unique IP based Network Extender technology maximising Ethernet data throughput which is also fully IEEE802.1pq compliant allowing either:

• Passive transmission of extended or ‘tagged’ Ethernet packets
• Automatic recognition and prioritisation of higher-order Ethernet packets in conjunction with QoS compliant applications such as IP Telephony, VoIP and Video broadcast systems.
• Highly selective QoS prioritisation using IP address (ranges), VLAN, Diffserv techniques when used with our DSLAM products.

In addition to unrivalled Ethernet performance on a per circuit basis, our ‘loop bonding’ E1 Network Extenders can aggregate E1 circuits to double the combined circuit speed from 2Mbps up to 4Mbps.

Product Codes:

ENE2000-Kit 2Mbps (E1)

ENE2020-Kit 4Mbps (2xE1’s)

ENE3400-Kit 34Mbps (E3)

DNE4500-Kit 45Mbps (DS3)

So all the throughput, product deployment and support benefits of Ethernet Layer2 combined with the intelligent traffic management of Ethernet Layer3.

Contact Network Extender Technologies for further details and please refer to the Technical Services section for details regarding the replacement of low performing and expensive to support ‘router based’ networks with the latest transmission techniques used by Carrier Class – Extended Networks